Sanding Parquet Flooring

Do you want to learn what goes behind sanding parquet flooring? You’ve come to the right place! First things first, a sander is an important tool for sanding parquet flooring. It can however be too small for the floor, so make sure you use an edge sander in this case. Invest into a corner sander if you have narrow corners. We recommend you should also hire equipment from a hired equipment hirer. The equipment hirer should also stock various grades of sanding belts. In addition to the sanding machine, you should also hire an edging sander that features 40-grit sanding discs.

If you aren’t sure about how to sand parquet flooring, you should first consult a professional. An experienced sanding company will be able to advise you on the right equipment for the job. 

The Process

The process of sanding parquet flooring is essential for the smoothest finish; it involves using a belt sander to remove the worn or damaged layer of wood from the floor. Then, a varnish is applied to bring out the natural beauty of the floor. Whether you want a high-gloss or satin finish depends on your personal taste and the design of your home.

There are a few tips you need to keep in mind while sanding parquet flooring such as you should avoid sanding the floor at a 90-degree angle to the grain. Instead, you should sand parquet at a 45-degree angle to the grain. Be sure to use the appropriate sanding equipment, an example being you should use 120-grit paper with a drum sander and a fine edging sander.

Depending on the size of the space where you’re working, you may need to sand parquet flooring in narrow hallways. The floor sander should be wide enough to reach the edges of the room whereas a sander that is too small will cause it to be too narrow. In these cases, you must use an edge sander or if your floors are too narrow, you should consider alternate sanding.

What’s Next?

Once the floor is dry, you can apply the wood-filler to fill the gaps as the filler is made of resin and can be applied to the parquet floor. It should be applied after the first sanding, due to the dust created during this process will have dirt and the old finish layer. You can clean up the dust with a vacuum cleaner, as it is not difficult to clean the floor after sanding.

If the floor is already sealed, you should apply a sealant to it but if you have not applied a sealant, you should sand it first. Using a sheepskin sander will help you get a smooth finish which will prevent the floor from becoming sticky and absorbing water. After the sanding, you should apply a clear wood filler as this is important for the integrity of the floor. Then, finish the floor by applying a polyurethane wood finish as it is both water- and oil-based. Some water-based finishes will darken the surface, while others do not.

Related Posts

Recent Posts