Floor Sanding Verwood

Floor Sanding and Wood Floor Restoration in Verwood and Cranborne Chase

QUICK QUOTATION

Floor sanding before and after

Floor Sanding in Verwood, Alderholt and Cranborne

Verwood has grown more than almost any town in Dorset. What was a heathland village of potters and brickmakers is now a town of fifteen thousand people, and the great majority of the housing was built from the nineteen-seventies onwards.

That makes it a different job from the Georgian market towns nearby. The floors here are mostly engineered oak, laminate, solid oak in the better-specified houses and a great deal of chipboard, rather than original pine over joists.

Out towards Alderholt, Cranborne and the Chase the older cottages have proper timber floors, brick, cob and thatch, and much older problems to go with them.

We cover Verwood, Alderholt, Cranborne, Three Legged Cross, West Moors, Woodlands, Edmondsham, Sixpenny Handley, Horton and Ashley Heath, plus Ferndown, Wimborne, Ringwood and Blandford.

What Can and Cannot Be Sanded

In a town built mostly since the seventies, this is the question that decides everything, so here is the plain answer.

Solid timber boards can be sanded several times over their life. Engineered flooring has a wear layer above a plywood core, typically two to six millimetres when new, and a full sand removes about one millimetre, so it depends how much is left and whether anyone has done it before. Laminate is a printed photographic layer over fibreboard and cannot be sanded at all. Chipboard flooring, standard under carpet in most estate housing of this era, cannot be sanded either.

We check by lifting a threshold strip or looking at a cut edge. It takes minutes and gives a definitive answer. If the answer is no, we say so at the survey and it costs you nothing rather than sending someone to discover it on the day.

parquet wooden floor sanding
wooden floor sanding

Screen and Recoat: Usually the Right Answer

A great many Verwood floors do not need sanding. They need their finish refreshing, which is a completely different and much cheaper job.

A screen and recoat abrades only the existing lacquer and puts a fresh coat over the top without touching the timber. It removes light scratching, scuffing and dullness, it is usually a single day, and it uses none of your wear layer.

It will not work where the finish is worn through to bare timber, where there are deep scratches or water marks, or where somebody has used silicone-based polish that stops a new coat bonding. We test a small area first.

For an engineered floor with a thin wear layer, a screen and recoat every few years is how you make it last decades rather than getting one sanding out of it and then replacing it.

Older Cottages Out on the Chase

Head a few miles towards Cranborne and Sixpenny Handley and the picture changes entirely. Brick, cob and thatch cottages with wide elm and early pine over sleeper walls, thin from centuries of use and carrying repairs from several different periods.

These need a light hand. We measure before quoting and take off the minimum that will produce a sound, even surface, using finer grits and more passes rather than an aggressive first cut.

Many are listed. Refinishing an existing floor is normally acceptable, but lifting or replacing historic boards can need consent from Dorset Council. And where a cottage is cob, remember that cob needs to breathe: cement render or modern paint applied at some point often pushes moisture into the floor instead. We take readings before quoting either way.

flooring sanding company

Heating, Movement and Gap Filling

Modern Verwood houses are warm and well sealed, and many have underfloor heating. All of that makes timber move more than it does in a draughty old cottage.

Heating coming on hard in October after a damp summer dries a floor quickly and opens gaps, then the reverse happens in spring. It is normal, but it changes what we recommend. Over underfloor heating we lean towards lacquer rather than oil, and we are cautious about gap filling on a floor that is still moving seasonally, because filler fitted in February can pop out in August.

We take readings at survey and will tell you plainly if gap filling would be money wasted on your floor.

Commercial Floors Around Verwood

We work for pubs, restaurants, cafes, hotels and shops across east Dorset, plus church and village halls, schools, colleges, nurseries, gyms, dance studios and sports halls.

Sports halls and dance floors are sanded back to clean timber, re-marked to the correct governing body specification for badminton, netball, basketball or five-a-side, then sealed with a proper sports system that keeps its grip rather than turning glassy.

Village and community halls we normally complete inside a single closed week including any line marking, which suits committees who cannot lose a month of bookings. Pubs and restaurants are done overnight or on closed days with fast-cure sealers. School floors go into holiday windows booked a term or more ahead.

Wood floor sanding company
Floor sanding taunton

Costs, Timings and Booking

Sanding and sealing generally runs twenty-five to forty pounds a square metre. A screen and recoat, where that is all a floor needs, costs considerably less and is usually a single day. Solid oak and parquet are higher. Stairs are priced per tread and repairs are quoted line by line.

The survey is free and takes about half an hour, and on a modern floor it settles the one question that actually matters, which is whether it can be sanded at all.

Ring 01823 674562 or use the contact form. Photographs of the room, the worst area and a cut edge if you can lift a threshold strip will get you a proper answer quickly.

Nearby areas we also cover: Ferndown, Wimborne, Blandford Forum and Bournemouth. There is a page for each, and the full list of towns is on our areas we cover page.

FAQ: Floor Sanding in Verwood

Verwood, Alderholt, Cranborne, Three Legged Cross, West Moors, Woodlands, Edmondsham, Sixpenny Handley, Horton and Ashley Heath, plus Ferndown, Wimborne, Ringwood and Blandford.

Sometimes. It depends how much wear layer is left, typically two to six millimetres when new against about one millimetre removed by a full sand. We check a cut edge or threshold before quoting.

No. Laminate is a printed photographic layer over fibreboard, not timber, and sanding destroys it. We tell you that at the survey and it costs you nothing.

Chipboard cannot be sanded. The options are a new floor covering over it or laying a timber floor on top. We would rather say so straight away than charge you to find out.

We abrade only the existing finish and apply a fresh coat over it. It removes light scratching and dullness without touching the timber, costs considerably less than a full sand and uses none of your wear layer.

Sanding and sealing is generally twenty-five to forty pounds a square metre. A screen and recoat is considerably less and usually a single day. Survey and quote are free.

It increases seasonal movement, so gaps open and close more. We usually recommend lacquer over oil on heated floors and are cautious about gap filling on a floor that is still moving.

Very. Cob needs to breathe, and cement render or modern paint often pushes moisture into the floor instead. We take readings first and will not sand a floor that is still wet.

We run industrial extraction which captures the great majority of dust at the machine. In a well-sealed modern house that matters more than you might think, because dust has nowhere to escape.

Yes. Pubs, restaurants, cafes, hotels, shops, village and church halls, schools, colleges, nurseries, gyms, dance studios and sports halls including line marking.

Ryan's Restoration
4.9
Based on 114 reviews
×
js_loader